Carelink CL-MC-XE1-IP-Y User Manual
                           | |
Contents
| 
CL-MC-XE1-IP-Y Series (1/2/4 E1) User Manual- 19 -# 4: 99 ms, 5: 145 ms, 6: 192 ms, 7: 239 ms ).# since the packet size is set to 1 (782 Bytes) which is about half# length of 1514 Bytes, the jitter buffer depth for packet size of# 782 bytes will be 23msec/2 = 11.5msecjitterbd 1 1#Set the transmit clock source to RxLine for E1 port#1#Usage: ceschclkset ch_num clksrc(0:Adaptive/1:Internal/2:RxLine)ceschclkset 1 2#Enable E1 port #1, and specifically set the destination IP and MAC#address of the remote device (CPE).ceschset 1 1 172.16.1.2 00:0b:f9:10:01:02lanset 1 7csaveScript for setting CPE site configuration back to default IIgcisrcnet 172.16.1.2 255.255.255.0ipset 192.168.2.11 255.255.255.0 172.16.1.1cespwidset 1 1 1pktsize 1 1jitterbd 1 1ceschclkset 1 0ceschset 1 1 172.16.1.1 00:0b:f9:10:01:01lanset 1 7csaveC) Script for resetting CL-MC-XE1-IP-Y to default IIIScript for setting the device back to default III(Enable E1 port#1 and port#2 and set LAN bandwidth to 400 kbps)Script for setting CO site configuration back to default IIIgcisrcnet 172.16.1.1 255.255.255.0ipset 192.168.1.11 255.255.255.0 172.16.1.2#Set both transmitting and receiving pseudowire ID to 1 for E1 port#1www.carelink.com |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine