Carrier 50FF Series Control Manual

Also see for 50FC Series: Installation, operation and maintenance instructions Controls, Start-Up, Operation and Troubleshooting User manual Service and maintenance instructions Installation, operation and maintenance instructions

Contents

Carrier 50FF Series Control Manual Manual pdf 16 page image

16Level 3Level 24 - GRAPHIC TERMINAL MENU STRUCTURE4.1. Passwords3 levels of access are configured for access to the parametersscreens: level 1 (no password), level 2 (with password) and level3 (with password).Level 3 password allows access to all level 2 screens.Change in the level of accessFrom the initial screen of the terminal, by pressing the key,the MAIN MENU is acceded.The keys and enable navigating through the menu untilthe Group of screens: K. PASSWORDS is reached.This group of screens is accessed by pressing . The followingscreen is displayed:Press the key until the cursor is placed on the desired accesslevel. Then, press on the key.The screen to enter the password is visualised. If this passwordis needed, please consult.The terminal comes back to the level 1 after a period of inactivityof 10 minutes. The change of level can also be done from onescreen of this menu.Access level NA01CURRENT LEVEL : 1Selection Level 2:Selection Level 3:Access level NA01CURRENT LEVEL : 1Selection Level 2:Selection Level 3: ->NA05Enter level 3password: 0000Main menu Access level Manufacturer menuService menuLevel 1Level 1Level 1Level 1Level 1Level 1Level 2Level 1Level 3Level 1Level 2Level 1Level 3a.Unit Config.b.Defrost Config.c. Compressor Config.d. Regulation Config.e.Safety Config.f. Alarm Config.g. EEV Config.h.Initializationa.Configurationb.EEV Setpointsc.Plug-fand.Calibratione.Simulationf.Working HoursGENUITAHCCONFIGBSETPOINTCGASCONFIGDINPUTS/OUTPUTSEMODESFSERCONFIGHGENCONFIGGUSERCONFIGIPASSWORDSKBMSCONFJSCHEDULELALARMSMGENTESTNCRTL_IDO