Carrier AQUAFORCE 30XW150-400 Operation & Service Manual

Contents

19Table 12 — Touch Pilot Controller Identification Configuration TableTable 13 — Touch Pilot™ User Configuration (USERCONF) TableBACKLIGHT ALWAYS ON? — This configuration is usedto keep the backlight on continuously or to turn it off after 60seconds with no activity.Allowable Entries: No/Yes (No=0 or Yes=1)Default Value: NoFULL ACCESS PASSWORD — This configuration is usedto specify the full access password. Refer to Table 1, SetupMenu, for additional information on passwords.Allowable Entries: 0 through 9999Default Value: 3333CONTROLLER ID DATA BLOCK NO. VALUE AND RANGE QUALIFIERSDevice Name 1 CHILLDSP8 character Name fieldDefaultOptionalLocal address 2 115 DefaultBus number 2 0 DefaultDevice (driver) type 2 0 = Non-bridge3 = Broadcast AcknowledgerDefaultOptionalPrimary baud rate 3 38400 DefaultSecondary baud rate 3 38400 FixedDevice description 4 Global Chiller Display24 character text fieldDefaultOptionalDevice location 4 (Blank)24 character text fieldDefaultOptionalSoftware part number 4 CESR-131363-01 FixedModel number 4 (Blank) FixedSerial number 4 (Blank) FixedReference number 4 Version 1.0 FixedBroadcast address processing list (primary) 5 241-251, 254, 255 enabled241-255 enabled/disabledDefaultsOptionalBroadcast address processing list (secondary) 5 none Not applicableDESCRIPTION LIMITS UNITS NAME DEFAULTBacklight always on? NoYes BACKLITE NoFull access password 09999 PSWDFULL 3333Limited access password 09999 PSWDLMTD 2222Active language 01 ACTLANG 0Time format 01 TIMEFMT 0Date format 02 DATEFMT 0Units base USMetric UNITBASE USContrast control ManualAuto CONTRAST AutoNetwork mode 01 NETWORK 0Network settingsAlarm acknowledger NoYes ALARMACK NoBroadcast acknowledger NoYes BROADACK NoEquipment CCN addressBus number 0239 EQUIPBUS 0Element number 1239 EQUIPELE 1Control variablesEquipment status (Not Used) Namechar 8 EQSTATUS NOT USEDEquipment start/stop (Not Used) Namechar 8 STARSTOP NOT USEDAlarm status (Not Used) Namechar 8 ALSTATUS NOT USEDAlarm reset (Not Used) Namechar 8 ALRESET NOT USED