Carrier i-Vu XT Router Installation And Startup Manual

Also see for i-Vu XT: Installation and startup guide Installation and startup guide

i-Vu® XT Router (drv_gen5) CARRIER CORPORATION ©2022Installation and Start-up Guide 34 All rights reservedColor Cache tabCache Group NumberPeer Caching Enabled This checkbox will be checked for the router that was defined in SiteBuilder as thepeer caching router.Disable Color Cache Clear (enable) to improve responsiveness in retrieving colors.Select (disable) to reduce network traffic to third-party (non-color-supporting)devices.NOTE Selecting this checkbox also disables dead module alarms.Dead Controller Timeout After this period (minutes:seconds) of non-response from the Carrier® controller,the router sends an alarm to the server.Reports Colors To The BACnet Object Identifier of the router that was defined in SiteBuilder as thepeer caching router.Diagnostics tabThis page allows you to:1 Download log files2 Capture network communication on the BACnet/SC ports and then download the capture file fortroubleshooting3 Access additional diagnostic tools with assistance from Carrier Controls System SupportLogs • Retrieve all - Downloads all logs into a zip onto your computer• Specific log - Allows you to choose to download the application logs (by date)or the system logs• Delete all• Delete capturesPacket CapturePrimary BACnet/SCSecondary BACnet/SCThis allows you to capture network communication on the BACnet/SC ports andthen download the capture file for troubleshooting.Click Start and Stop to initiate and end your capture, then click Get capture file todownload the file.NOTE Capture files have a 25MB limit. If you need a larger capture, contactCarrier Controls System Support.To dissect BACnet/SC packet captures, you will need to place the two providedLua scripts into the plugins directory of your Wireshark installation. You candownload the Lua scripts from the Carrier® Community Portal website.Technical Support Tools Send the displayed Challenge key to the Carrier Controls System Supportrepresentative who will provide an Activation Key for you to enter, then clickEnable.Additional tools will be displayed to help Carrier Controls System Supporttroubleshoot issues. Enabling these tools has security implications, therefore theyare automatically disabled after 2 hours.