Casio CT-X5000 User Manual

Also see for CT-X3000: Firmware update guide

Contents

Casio CT-X5000 User Manual Manual pdf 11 page image

Preparing a Power SupplyEN-10While Auto Resume is turned on, the current settings of theitems described below are retained even when power isturned off (as long as power continues to be supplied to theDigital Keyboard, and power is turned off normally by pressing1P (power) or by triggering of Auto Power Off).● Current settings of the items belowTone (UPPER 1, LOWER 1, UPPER 2, LOWER 2),Rhythm, Song number, Music Preset number, Tempo,Transpose, Octave Shift, [ACCOMP] indicator displayed/not displayed status● On/off status of the functions belowSplit, Layer, Portamento, Sustain, Auto Harmonize orArpeggiator, CT-X5000: Modulation/Assignable*1, PartMode● Function setting* 2 (page EN-112) status● Mixer (page EN-64) setting status● CT-X5000: Category selection, tone and rhythmcategory selection status, last selected tone/rhythm ineach tone/rhythm category*1 When the setting configured with the following operation is“2 Toggle”: MODULATION/ASSIGNABLE (Mod/Asgn) 3Button operation (Btn Act) (page EN-114).*2 Including Reverb, Chorus, Delay, and other effect settingsincluded in the function settings.The next time power is turned on, the Digital Keyboard isreturned to its setup state when power was last turned off.Perform the procedure under “To configure function settingswith the bk FUNCTION button” (page EN-112) and turn onAuto Resume: Other (Other) 3 Auto Resume (AtResume)(page EN-117).• Regardless of Auto Resume is on or off, the settings of theitems below, which are included in function settings (pageEN-112), are retained even when power is turned off (aslong as power continues to be supplied to the DigitalKeyboard, and power is turned off normally by pressing1P (power) or by triggering of Auto Power Off).Equalizer, Tuning, Registration Memory Freeze Target,Pedal 2 type, Expression pedal calibration, Tap rhythmstart, Examination Mode, Display contrast• Auto Resume does not restore the status of the settingitems below.Note value setting, Phrase recording setting, Synchrostandby, Audio Mode file selection and playback state,Local control setting.1. Press bk FUNCTION.2. Press the [1] (V) bm number key to display“Other”.3. Press the [6] (ENTER) bm number key.4. Use the [1] (V) and [3] (W) bm number keysto display “Contrast”.5. Use bn [–] and [+] or the bl dial to change thesetting value.6. When the setting is the way you want, long-press the [4] (EXIT) bm number key to exit thesetting screen.Auto Resume Adjusting Display ContrastO t h e rC o n t r a s tCurrent setting value