Operations Common to All ModesEN-161. Use the [1] (V) and [3] (W) bm number keysto move the cursor to the position of thecharacter you want to change.2. Use bn [–] and [+] to change the character.• Repeat steps 1 and 2 as required.• Input of the characters shown in the table below issupported when saving a file to a USB flash drive.• If you input a similarity symbol ( ), it will be displayedas a right arrow (3).• Input of the characters shown in the table below issupported when saving a file to Digital Keyboardmemory.1. Use the [1] (V) and [3] (W) bm number keysto move the cursor to the position of thecharacter you want to delete.2. Press the [9] (DELETE) bm number key.The [FUNCTION] indicator is displayed or flashes when youperform a Digital Keyboard function setting (page EN-112) orother special setting operation. The meanings of the text thatappears along with a displayed or flashing [FUNCTION]indicator are described below.* Only while a setting item that is a function setting isdisplayed.The example below shows how the [FUNCTION] indicator isdisplayed.1. Press bk FUNCTION.2. Press the [3] (W) bm number key a number oftimes until “Touch” (Touch Response) isdisplayed.“Touch” is a setting item name, so the [FUNCTION]indicator appears.To modify charactersTo delete characters9JT'8IS_`7HR&~6GQS@5FPZ}4EOY{3DNX^2CMW-1BLV)0AKU(~3=GQ[eoy)2<FPZdnx(1;EOYcmw'0:DNXblv&/9CMWaku%.8BLV`jt$-7AKU_is}#6@JT^hr|"5?IS]gq{!+4>HR'fpzFUNCTION IndicatorDisplayed Setting item name displayed.*Flashing Setting of the currently displayed setting itemdisplayed.Example: To configure the Touch ResponsesettingDisplayedT o u c hSetting value number Setting item name
