Casio CT-X5000 User Manual

Also see for CT-X3000: Firmware update guide

Contents

Casio CT-X5000 User Manual Manual pdf 72 page image

EN-71You can edit a built-in tone to create a user tone, and save upto 100 user tones for later recall.■ Saving to an External DeviceUser tones can be saved to a USB flash drive or a computer.For details, see “To save Digital Keyboard data to a USB flashdrive” (page EN-121) and “Transferring Data Between theDigital Keyboard and a Computer” (page EN-125).1. Select the tone you want to edit.• Be sure to select the UPPER 1 part tone (pageEN-19). The UPPER 1 part tone will be the tone beingedited.• You cannot select a drum set tone for editing.2. Long-press bk FUNCTION until the [EDIT]indicator appears.• This enters the Tone Editing Mode and displays thetone editing screen.• For details about editable parameters, see the “ToneEditing Item List” (page EN-74).3. Use the [1] (V) and [3] (W) bm number keysto display the editing item you want to modify.• If the [ENTER] indicator is displayed, press [6](ENTER) to enter the sub-menu and then use the [1](V) and [3] (W) keys to display the editing item youwant to modify.• To return to a main menu from a sub-menu, press the[4] (EXIT) bm number key.• Using the “DSP Edit” editing item, you can configureprecise DSP effects for a tone using a wide variety ofparameters. For details about the configuration ofDigital Keyboard DSP effects and an overview of DSPediting, see “DSP Editing” (page EN-72). For detailsabout the DSP editing operation, see “To use DSPediting to edit an effect” (page EN-72).4. Use bn [–] and [+] or the bl dial to change thesetting value.5. Repeat steps 3 and 4 above for each of theediting items you want to change.• You can sound the tone you are editing by playingsomething on the keyboard. This means you canimmediately check to see how your edits are affectingthe tone.6. To save the edited tone, press the [7] (WRITE)bm number key.• If the tone you are editing is a user tone, the message“Replace?” will appear here. Press bn [+] (YES) toreplace the original tone data with the new data, or bn[–] (NO) to save the new data without replacing theoriginal data.• If there are already 100 user tones stored in memory,the error message “Data Full” will appear when youpress bn [–] (NO) to indicate that you cannot save thenew tone.• The message “Wait...” remains on the display whilethe tone save operation is being performed. Do notperform any operation while this message is on thedisplay. “Complete” appears on the display after theoperation is complete.7. To exit the Tone Editing Mode, long-press the[4] (EXIT) bm number key.• If you did not perform any editing after executing theoperation in step 6, the Tone Editing Mode will beexited and the [EDIT] indicator will disappear from thedisplay.• If you performed any editing after executing theoperation in step 6, the message “Exit?” will bedisplayed here. Perform one of the operations below.Editing a Tone (User Tones)Creating a User ToneTo edit a toneDisplayedA t k . T imeCurrent setting value Editing item nameTo do this: Perform this operation:Continue editingwithout exiting theTone Editing ModePress bn [–] (NO).Save edited data andexit the Tone EditingMode(1) Press bn [+] (YES).(2) When “Write?” appears on thedisplay, press bn [+] (YES)again.Discard edited dataand exit the ToneEditing Mode(1) Press bn [+] (YES).(2) When “Write?” appears on thedisplay, press bn [–] (NO).