Casio CT-X5000 User Manual

Also see for CT-X3000: Firmware update guide

Contents

Casio CT-X5000 User Manual Manual pdf 93 page image

Using the MIDI Recorder to RecordEN-92• The [RECORD] indicator will start to flash during recordingwhen the number of remaining note count is 100 or lower.When there are no more remaining notes, recording stopsautomatically and the [RECORD] indicator disappears.• To make a new recording by selecting the recordingdestination song number first, see “To change the recordingdestination song number during recording standby” (pageEN-95).• You can configure settings to sound a pre-count beforerecording starts or the metronome while recording is inprogress. See “To sound a pre-count or the metronome”(page EN-95).• You can exit recording standby at any time ([RECORD]indicator flashing) by pressing 8 RECORD/STOP onceor twice so the [RECORD] indicator is not displayed.1. Press 6 RHYTHM.2. Specify the tempo to use at the start ofrecording.• See “Changing Auto Accompaniment Speed (Tempo)”(page EN-46).3. Select the rhythm and tone you want to use atthe start of recording.• See “Selecting a Rhythm” (page EN-43) and“Selecting a Tone” (page EN-18).• If you want to change mixer settings of each of thesystem track parts, perform the procedure under “Toconfigure mixer settings” (page EN-64). Configure themixer settings of each part of the KEYBOARD partgroup.• Layer and split settings, as well as other settings arealso recorded. For details about recorded data, see“Recording Track and Recorded Data” (page EN-90).4. Press 8 RECORD/STOP.This enters recording standby.• The [SONG] and [SYSTEM] indicators are alsodisplayed at this time, and the mixer part indicators( to ) all start to flash. This indicates that thesystem track is the recording target.5. Playing on the keyboard automatically startsrecording.• Pressing ck START/STOP starts the rhythm andrecording at the same time.• While recording is in progress, the number ofmeasures since recording started is indicated in theupper right corner of the display.6. When you are finished recording, press8 RECORD/STOP.This causes the [RECORD] indicator to disappear.• Pressing ck PLAY/STOP will play back the recordeddata.• Recording using the above operation automatically selectsthe lowest song number (31 to 40) that does not haveanything recorded to it yet as the recording destination.Recording Keyboard PlayTo record a new system trackFlashingDisplayedDisplayedMeasure Beat