Casio CT-X5000 User Manual
Also see for CT-X3000: Firmware update guide
                                                                                                                                                             | |
Contents
| 
EN-59Using Phrase Pads1. Perform the procedure 1 through 3 under “Tochange the phrase set” (page EN-54) to selectthe number of the phrase set you want todelete.2. Long-press 8 RECORD/STOP until “Copy” isdisplayed.3. Use the [1] (V) and [3] (W) bm number keysto display “Clear”, and then press [6] (ENTER).This displays “Sure?”4. Press bn [+] (YES) to delete or bn [–] (NO) tocancel the delete operation.• Pressing bn [+] (YES) displays the message “Wait...”(operation in progress). Do not perform any operationwhile this message is displayed. “Complete” isdisplayed after the operation is complete.5. To exit the operation, long-press the [4] (EXIT)bm number key.You can use the procedures in this section to edit individualphrases. You can delete or copy a phrase, and configurequantize, key shift, and mixer settings.• Quantize automatically corrects the timing of recordednotes to match a note value being used as the quantizereference.• Key shift offsets the pitch of recorded sounds in semitonesteps.To edit a phrase, enter the phrase editing mode.1. Press bk FUNCTION.2. Use the [1] (V) and [3] (W) bm number keysto display “Phr Pad”, and then press [6](ENTER).This displays “Phr Set”.3. Use bn [–] and [+] or the bl dial to select thenumber of the phrase set that includes thephrase you want to edit.4. Long-press bk FUNCTION until the [EDIT]indicator appears.• This enters the phrase editing mode. “Clear” willappear at this time.1. Use the procedure under “To enter the PhraseEditing mode” (page EN-59) to enter the PhraseEditing mode.2. Press the [6] (ENTER) bm number key.This displays “Phrase” and causes the [P1] indicator toflash on the display.3. Use bn [–] and [+] or the bl dial to select thenumber of the phrase you want to delete, andthen press [6] (ENTER).This displays “Sure?”4. Press bn [+] (YES) to execute or bn [–] (NO) tocancel.• Pressing bn [+] (YES) displays the message “Wait...”(operation in progress). Do not perform any operationwhile this message is on the display. “Complete” isdisplayed after the operation is complete.5. To exit the operation, long-press the [4] (EXIT)bm number key.To delete a phrase set Editing a PhraseTo enter the Phrase Editing modeTo delete a phraseDisplayed |
Related manuals for Casio CT-X3000
manualsdatabase
Your AI-powered manual search engine