Casio CTK-691 User Manual

Also see for CTK-691: Midi implementation Service manual

Contents

Casio CTK-691 User Manual Manual pdf 43 page image

E-41Mixer Function3. Use the [ ] and [ ] CURSOR buttons toselect the parameter whose setting you want tochange.Example:Select volume setting by displaying “Volume”. Each press of the [ ] or [ ] CURSOR buttonscycles through the parameters. You can use the [ ] and [ ] CURSOR buttonsto change to another channel at any time duringthis procedure.1 Indicates channel volume of 1274. Use the number buttons or [+] and [–] to changethe parameter setting.Example:Change the setting to “060”. Pressing the MIXER or EXIT button exits theparameter edit mode.1. While Channel 16 is selected, press the [ ]CURSOR button. This selects the DSP channel. Pressing the [ ] CURSOR button while the DSPchannel is selected returns to Channel 16.The following are the parameters whose settings can bechanged in the Parameter Edit Mode.z Tone (Range: 000 to 803, Drawbar organ tones 000 to 199)This parameter controls the tones assigned to each part.Anytime the tone is on the display, you can use the TONEbutton or DRAWBAR ORGAN button and then select adifferent tone, if you want.z Part On/Off (Settings: on, oFF)This parameter can be used to turn each part on (sounds) andoff (does not sound). The current on/off status of each part isindicated on the display as described below.z Volume (Range: 000 to 127)This is the parameter that controls the volume of the selectedchannel.z Pan Pot (Range: –64 to 00 to +63)This parameter controls the pan pot, which is the center pointof the left and right stereo channels. Setting “00” specifiescenter, a value less than “00” moves the point left, and a valuegreater than “00” moves it right.Editing DSP Channel ParametersHow Parameters WorkTone Parameters705A-E-043A