Casio CTK-691 User Manual

Also see for CTK-691: Midi implementation Service manual

Contents

Casio CTK-691 User Manual Manual pdf 90 page image

DSP Algorithm ListE-88DSP Algorithm ListJ 00 :Auto Pan FunctionContinually performs left-right panning of the inputsignal in accordance with an LFO. ParametersJ 01 :Tremolo FunctionAdjusts volume of input signal in accordance with anLFO. ParametersJ 02 :2BandEQ FunctionThis is a two-band equalizer. ParametersJ 03 :3BandEQ FunctionThis is a three-band equalizer. ParametersJ 04 :LFO Wah FunctionThis is a “wah” effect that can automatically affect thefrequency in accordance with an LFO. ParametersJ 05 :Auto Wah FunctionThis is a “wah” effect that can automatically affect thefrequency in accordance with the level of the input signal.0 : Rate (Range: 0 to 127)Adjusts the panning rate.1 : Depth (Range: 0 to 127)Adjusts the panning depth.0 : Rate (Range: 0 to 127)Adjusts the tremolo rate.1 : Depth (Range: 0 to 127)Adjusts the tremolo depth.0 : Low Frequency (Range: 0 (200Hz), 1 (400Hz), 2(800Hz))Adjusts the cutoff frequency of the low-bandequalizer.1 : Low Gain (Range: –12, –11, –10 to 0 to +10, +11,+12)Adjusts the gain of the low-band equalizer.2 : High Frequency (Range: 0 (6.0KHz), 1(8.0KHz), 2 (10KHz))Adjusts the cutoff frequency of the high-bandequalizer.3 : High Gain (Range: –12, –11, –10 to 0 to +10, +11,+12)Adjusts the gain of the high-band equalizer.0 : Low Frequency (Range: 0 (200Hz), 1 (400Hz), 2(800Hz))Adjusts the cutoff frequency of the low-bandequalizer.1: Low Gain (Range: –12, –11, –10 to 0 to +10, +11,+12)Adjusts the gain of the low-band equalizer.2: Mid Frequency (Range: 0 (1.0KHz), 1 (1.3KHz),2 (1.6KHz), 3 (2.0KHz), 4 (3.0KHz), 5 (4.0KHz),6 (6.0KHz), 7 (8.0KHz))Adjusts the center frequency of the mid-bandequalizer.3: Mid Gain (Range: –12, –11, –10 to 0 to +10, +11,+12)Adjusts the gain of the mid-band equalizer.4: High Frequency (Range: 0 (6.0KHz), 1(8.0KHz), 2 (10KHz))Adjusts the cutoff frequency of the high-bandequalizer.5: High Gain (Range: –12, –11, –10 to 0 to +10, +11,+12)Adjusts the gain of the high-band equalizer.0: Input Level (Range: 0 to 127)Adjusts the input level. The input signal canbecome distorted when the level of the soundbeing input, the number of chords, or theResonance value is large. Adjust this parameterto eliminate such distortion.1: Resonance (Range: 0 to 127)Adjusts the resonance of the sound.2: Manual (Range: 0 to 127)Adjusts the frequency used as the basis for thewah filter.3: LFO Rate (Range: 0 to 127)Adjusts the rate of the LFO.4: LFO Depth (Range: 0 to 127)Adjusts the depth of the LFO.705A-E-090A