Casio CTK-691 User Manual

Also see for CTK-691: Midi implementation Service manual

Contents

Casio CTK-691 User Manual Manual pdf 70 page image

Keyboard SettingsE-68 Turning on split switches the currently selected part to Part3, and displays the split tone. At that time, you can use the[ ] and [ ] CURSOR buttons to switch between parts.Turning off split returns to Part 1. The main tone sounds over Channel 1, while the split tonesounds over Channel 3. You can also use the Mixer tochange the tone and volume settings for these channels. Note that split is not possible during record standby orrecording in the Song Memory Mode, or while you areusing the SMF Player Mode. When the accompaniment mode is set to CASIO CHORDor FINGERED, the accompaniment keyboard range is inaccordance with the split point you specify with the aboveprocedure.You can use layer and split together to create a layered splitkeyboard. It makes no difference whether you layer tones firstand then split the keyboard, or split the keyboard and thenlayer tones. When you use layer and split in combination, thehigh range of the keyboard is assigned two tones (main tone+ layered tone), and the low range two tones (split tone +layered split tone).J LAYER SPLIT1. Press the TONE button and then input the tonenumber of the main tone.Example:To set “361 BRASS GM” as the main tone.2. Press the SPLIT button and then input thenumber of the split tone.Example:To set “345 PIZZICATO GM” as the split tone. After specifying the split tone, press the SPLITbutton to unsplit the keyboard.3. Press the LAYER button and then input thenumber of the layered tone.Example:To set “360 FRENCH HORN GM” as the layeredtone.4. Press the SPLIT button or the LAYER button soboth of the SPLIT and LAYER indicators aredisplayed.5. Input the number of the layered split tone.Example:To specify the “348 STRINGS 1” tone, enter 3, 4,8.6. While holding down the SPLIT button, press thekeyboard key where you want the lowest note(the leftmost key) of the upper range (right siderange) to be.7. Play something on the keyboard. Press the LAYER button to unlayer the keyboard,and the SPLIT button to unsplit it. Turning on layer+split switches the currently selected partto Part 4, and displays the layered tone. At that time, youcan use the [ ] and [ ] CURSOR buttons to switchbetween parts. Turning off layer returns to Part 3, whileturning off split returns to Part 2. Turning off both layer andsplit returns to Part 1. The main tone sounds over Channel 1, the layer tone overChannel 2, the split tone over Channel 3, and the layer/splittone over Channel 4. You can also use the Mixer to changethe tone and volume settings for these channels.Using Layer and Split TogetherTo split the keyboard and then layer tones705A-E-070A