E-14Using Built-in TonesChanging the Tempo SettingThere are two different methods you can use to changethe tempo setting: by pressing q (faster) and w(slower) buttons or by tapping a beat with a button.■ To adjust the tempo using q and wbuttons1. Use the (TEMPO w, q) buttons toadjust the tempo setting.Each press of a button increases or decreases the beatsper minute value by one.• Holding down either button changes the value athigh speed.• You can specify a tempo value in the range of 20 to255.■ To adjust the tempo by tapping a beat1. While holding down the (FUNCTION)button, tap the q (TEMPO) button fourtimes in time with the beat you want tospecify.• The tempo setting will change in accordance with thetiming of your tapping.• After you use this method to specify the approximatetempo, you can then use the procedure under “Toadjust the tempo using q and w buttons” to adjustthe setting to a more exact value.Adjusting the Metronome VolumeYou can use the following procedure to adjust thevolume level of the metronome, without affecting thevolume of Digital Piano output.1. While holding down the (FUNCTION)button, press the (METRONOME) button.This displays the metronome volume screen.2. Use the (w, q) buttons to adjust themetronome volume.3. Press the (FUNCTION) button.This will exit the metronome volume screen and causethe FUNCTION lamp to go out.NOTE• You also can use the procedure under “MetronomeVolume” (page E-41) to adjust the metronomevolume.You can use the Duet Mode to split the Digital Piano’skeyboard in the center so two people can play a duet.This makes it possible to configure the keyboard so, forexample, the teacher can play on the left and thestudent can follow along on the right. Or one personcan play the left hand part on the left, while anotherplays the right hand part on the right.Pedal Operation when Playing a DuetTempo valueTap four timesPlaying a DuetMetronome volumeC3 C4 C5 C6 C3 C4 C5 C6Right keyboardLeft keyboard(Middle C) (Middle C)Left and right side damper pedalLeft keyboarddamper pedalRight side damper pedal(Half-pedal operationsupported)