Casio Celviano 6ES1A User Manual

Contents

Casio Celviano 6ES1A User Manual Manual pdf 31 page image

EnglishMusic PresetsE-273. Press the  (START/STOP) button to startAuto Accompaniment with the chordprogression of the Music Preset. Play themelody on the keyboard.• The preset chord progression repeats until you stop itby pressing the  (START/STOP) button again.• Pressing the  (ACCOMP ON/OFF) button so theACCOMP ON/OFF lamp is lit (not flashing) or unlitwill turn off the chord progression of the MusicPreset and play the normal Auto Accompanimentpattern.• Each press of the  (ACCOMP ON/OFF) buttoncycles in the sequence shown below.• You can use the following steps to change the rhythmafter selecting a Music Preset.• To change the tone, use the  through  (tonegroup) buttons to select the tone group and then usethe  (w, q) buttons to select a tone number.4. To exit a Music Preset, press  and (MUSIC PRESET) at the same time.A Music Preset editor is provided to allow you tocreate your own original Music Presets (user presets).Up to 50 user presets can be stored in Music PresetGroup D.1. Select the Music Preset you want to edit inorder to create your user preset.2. Change the tone number, rhythm number,and other settings of the Music Preset as youwant.• The settings you configure here will be saved as auser Music Preset. See step 2 under “Selecting aMusic Preset” (page E-26) for the settings you canconfigure and save for a user Music Preset.3. Press the  (BALLAD/PIANO RHYTHMS)and  (USER RHYTHMS) buttons at thesame time.This displays a screen for selecting the type of editingoperation you want to perform.(1) Hold down the  (RHYTHM) button until thedisplayed Music Preset number and name changeto the rhythm number and name.(2) Use the  (w, q) buttons to select the rhythmyou want.(3) Hold down the  (RHYTHM) button again untilthe rhythm number and name change back to theMusic Preset number and name.LitUnlit FlashingNormal Auto Accompaniment Music Presetchord progressionCreating an Original UserPresetEditing operation type