Casio DT-970M50E User Manual

Also see for DT-970 Series: Hardware manual

E-16USB Client Port This port is used to transmit data and files (download, upload) byconnecting the cradle to a PC using a USB cable (DT-380USB-A).The dedicated driver must be installed in the PC before connectingthe cradle to the PC.USB Host Port This port is used to connect a corresponding USB peripheral device.Power Switch Turns the power on and off.Selector Switch This switch is used to switch between a USB connection and a LANconnection.LAN ConnectionStatus LEDThis LED shows the status of the LAN connection.Off: LAN cable not connected correctly.Lit green: LAN cable connected correctly.LANCommunicationStatus LEDThis LED shows the LAN operation status.Off: No communication.Blinking green: Communication in progress.LAN Port This port is used for connecting the cradle to a PC or hub via aLAN cable so that data and files can be transmitted (uploaded ordownloaded).The special driver software must be installed in the DT-970.AC Adaptor Jack Connect the AC adaptor here.Terminal DetectSwitchThis switch detects when the DT-970 is seated correctly on the cradle.Power Contacts Power is supplied to the DT-970 via these contacts.DataCommunicationTerminalUsed for data communications.Power IndicatorLEDThis LED indicates the power status and the mounting status of theDT-970.Off: Power offGreen: Power on, DT-970 mounted correctlyRed: Power on, DT-970 not mountedMount Hooks Use these hooks to lock the DT-970 into the cradle.