Casio DT-970M50E User Manual

Also see for DT-970 Series: Hardware manual

E-26DT-970 SpecificationsModel: DT-970M50E/M51ECPU: 32bit CPUMemory: 8MB RAM, 32MB Flash ROM (user area: approx. 28MB)Display: 2.3-inch, 128 × 128-dotLaser Scanner:Readable symbologies: UPC-A/UPC-E/EAN8 (JAN8)/EAN13 (JAN13)/Codabar(NW-7)/Code39/Interleaved2of5 (ITF)/MSI/Industrial2of5/Code93/Code128 (GS1-128 (EAN128))/IATA/GS1DataBarOmnidirectional (RSS-14)/GS1 DataBarLimited(RSS Limited)/DataBar Expanded (RSS Expanded)/GS1DataBarStacked (RSS-14 Stacked)/GS1DataBar ExpandedStacked (RSS Expanded Stacked)/GS1 DataBar Truncated(RSS-14 Truncated)/GS1 DataBar Stacked Omnidirectional(RSS-14 Stacked)Scanning distance: DT-970M51E: Within approximately 40-550 mmDT-970M50E: Within approximately 45-550 mmIR Port:Interface: IrDA Ver. 1.0Synchronization: Asynchronous, frame synchronizationTransmission rate: 2,400 bps/9,600 bps/19,200 bps/38,400 bps/57,600 bps/115,200 bps/Bluetooth ® :Protocol: Bluetooth® Specification Ver.2.1+EDRRange: Approximately 5 m (depends on radio wave conditionsand environment)Output: 4dBm max. (PowerClass2)microSD Memory Card Slot:Compatible with SDHC Memory CardPower Requirements:Main power supply: Alkaline AA batteries (LR6) 2Or, eneloop AA batteries 2Backup power supply: Lithium battery (CR2032) 1Consumption Current: DC 3V/0.4ABattery Life:Main batteries: Approx. 175 hours (at room temperature using the alkaline AAbatteries supplied, with key standby, calculation and scanningused in a 20:1:1 ratio)Approx. 200 hours (at room temperature with 2 scans every 10seconds)Backup battery: 20 days (backup for the memory (RAM) and clock)Operating Temperature: –10°C to 50°C (14°F to 122°F)Operating Humidity: 10% to 80% RH (non-condensation)Dust and Water Splash Proof:IP67-compliantDimensions: Refer to “Dimensional Drawing” on the next page.Weight: Approximately 215g (including alkaline AA batteries)Vibrator Function: Available according to software setting.