Casio DT-970M50E User Manual

Also see for DT-970 Series: Hardware manual

E-33Connecting the Ethernet Cradle (HA-N62IO) Power SupplyUse the separately sold AC adaptor (AD-S42120C) for the power supply of the EthernetCradle. Always make sure to connect the AC adaptor to the Ethernet Cradle beforeperforming communication with the Handheld Terminal. Power to the HandheldTerminal is supplied from the Ethernet Cradle.1. Plug the AC adaptor into the AC adaptor jack on the back of the Ethernet Cradle.2. After connecting the power cable to the AC adaptor, plug the other end of it into anelectrical outlet.3. Use the selector switch on the left side of the Ethernet Cradle to select the port to beused. Set the switch to the “LAN” position when using the LAN port on the cradle.Set the switch to the “B” position when using the unit as a USB client, or set it to the“A” position when using the unit as a USB host.