Casio DT-970M50E User Manual

Also see for DT-970 Series: Hardware manual

E-21Removing1. Make sure that the power on the terminal has been switched off. If the power is stillon, press the power key to switch off.2. Remove the batteries and open the microSD card cover.3. Catch the projecting lip with your fingertip as shown in the illustration and pull thecard out.4. Close the microSD card cover and install the batteries.Important!A microSD card must be inserted with the top and bottom properly alignedand in the proper direction. Attempt in inserting it with an excessive force inincorrect orientation can risk damage to the connectors and slot.Never turn off the power or remove a microSD card from the slot while the cardis being accessed. Doing so can damage the microSD card or data in the card.Do not drop the card or lose it.•••