E-104Saving Data735A-E-106BSmartMedia Card Error MessagesDisplay Message Cause ActionErr Card R/WErr CardFullErr No CardErr NameErr ReadOnlyErr FormatErr Mem FullErr Not SMF0Err No FileErr ProtectErr ConvertErr WrongDatThere is something wrong with the card.The card is full.1. The card is not set correctly in the card slot.2. There is no card in the card slot or the cardwas removed part way through a cardoperation.1. A file with the same name as the one youare trying to use already exists.2. You are trying to use a file name that is notallowed by MS-DOS.Attempt to save a file using the same name asan existing file that is read only.1. The format of the card is not compatiblewith this keyboard.2. The card is not formatted.3. The card is damaged.Keyboard memory became full whileimporting data from card.The file you are reading is not an SMF 0 formatfile.The keyboard cannot find any file it can readon the card.The card is write protected.There is not enough memory to save dataproduced by converting song data from SONGformat to SMF format.The data on the card is corrupted.Use a different card.1. Use a different card.2. Delete files you no longer need from thecard (page E-101).1. Remove the card and reinsert it correctly(page E-94).2. Insert a card into the card slot. Never removea card from the card slot while a card accessoperation is in progress.1. Use a different name (page E-100).2. Name files using the allowable characters(page E-103).Save the new file to a different card or useanother name.1. Change to a card that has the proper format................................................................. E-1022. Format the card. ................................... E-1023. Use a different card.1. Delete data you no longer need from theuser area that corresponds to the file youare trying to store.2. If you have song data stored in SongMemory (SG0 to 4), delete the song datayou no longer need. ............................... E-72Use SMF 0 format files only.Use a card that contains data stored by thiskeyboard or compatible data from anotherdevice.1. Use a different card.2. Remove the card’s write protect sticker toenable data storage. ............................... E-93Delete SMFs you no longer need from yourSMF data (page E-80).Use other data or another card.WK3100_e_89-105.p65 04.3.26, 0:12 PM104