Casio WK-3000 User Manual

Also see for WK 3500 - Keyboard 76 Full Size Keys: Midi implementation Service manual

Contents

Casio WK-3000 User Manual Manual pdf 79 page image

E-77T r a n s .T r a n s .735A-E-079BKeyboard SettingsTransposing the KeyboardTranspose lets you raise and lower the overall key of thekeyboard in semitone units. If you want to play anaccompaniment for a vocalist who sings in a key that’sdifferent from the keyboard, for example, simply usetranspose to change the key of the keyboard.To transpose the keyboard1 Press the TRANSPOSE/FUNCTION button.• This causes a pointer to appear on the display next toTRANSPOSE/FUNCTION, and displays thetranspose setting screen.2 Use [+] and [–] to change the transpose setting ofthe keyboard.Example: To transpose the keyboard five semitonesupwards.• Pressing the TRANSPOSE/FUNCTION button exitsthe transpose screen.NOTE• The keyboard can be transposed within a range of –24(two octave downwards) to +24 (two octave upwards).• The transpose setting also affects playback from songmemory and Auto Accompaniment.• The allowable pitch range you can transpose withindepends on the tone you are using. If a transposeoperation causes a note to be outside of the pitch rangefor the tone being used, the keyboard automatically playsthe same note in the nearest octave that falls within thepitch range of the tone you are using.5 Input the number of the layered split tone.Example: To specify the “348 STRINGS 1” tone, enter 3,4, 8.6 While holding down the SPLIT button, press thekeyboard key where you want the lowest note (theleftmost key) of the upper range (right side range)to be.7 Play something on the keyboard.• Press the LAYER button to unlayer the keyboard, andthe SPLIT button to unsplit it.NOTE• Turning on layer+split switches the currently selectedpart to Part 4, and displays the layered tone. At thattime, you can use the [] and [] CURSOR buttons toswitch between parts. Turning off layer returns to Part3, while turning off split returns to part 2. Turning offboth layer and split returns to Part 1.• The main tone sounds over Channel 1, the layer toneover Channel 2, the split tone over Channel 3, and thelayer/split tone over Channel 4. You can also use theMixer to change the tone and volume settings for thesechannels.S t r i n s 1gWK3000_e_74-88.p65 04.3.26, 0:11 PM77