E-60To Save a Setup in RegistrationMemory1 Select a tone and rhythm, and otherwise set up thekeyboard the way you want it.• See “Registration Memory Settings” on page E-59 fordetails on what data is stored in the registrationmemory.2 Use the BANK button or the number buttons toselect the bank you want.• If you do not perform any operation for about fiveseconds after pressing the BANK button, the displayreturns to the contents in step 1, above.• Bank 1 selected.3 While holding down the STORE button, press aREGISTRATION button (1 to 4).• The following display appears when you press the 2button.4 Release the STORE and REGISTRATION buttons.NOTE• The setup is saved as soon as you press aREGISTRATION button in step 3, above.Registration MemoryB a n kS t o r eTo Recall a Setup fromRegistration Memory1 Use the BANK button or the number buttons toselect the bank.• If you do not perform any operation for about fiveseconds after pressing the BANK button, the keyboardautomatically clears the registration memory recallscreen.2 Press the REGISTRATION button (1 to 4) or numberbuttons for the area whose setup you want to recall.• The setup name along with the message “Recall”appears on the display.NOTE• If you press a REGISTRATION button without using theBANK button to select a bank first, the last bank numberselected is used.B a n kR e c a l l735A-E-062ANumber buttonsBANKSTOREREGISTRATIONWK3000_e_59-60.p65 04.3.26, 0:11 PM60
