E-76To split the keyboard and then layertones1 Press the TONE button and then input the tonenumber of the main tone.Example: To set “361 BRASS GM” as the main tone.2 Press the SPLIT button and then input the numberof the split tone.Example: To set “345 PIZZICATO GM” as the split tone.• After specifying the split tone, press the SPLIT buttonto unsplit the keyboard.3 Press the LAYER button and then input the numberof the layered tone.Example: To set “360 FRENCH HORN GM” as thelayered tone.4 Press the SPLIT button or the LAYER button so bothof the SPLIT and LAYER indicators are displayed.Split Tone (PIZZICATO GM)+Layered Split Tone(STRINGS 1)Main Tone (BRASS GM)+Layered Tone (FRENCH HORN GM)Split pointUsing Layer and Split TogetherYou can use layer and split together to create a layered splitkeyboard. It makes no difference whether you layer tonesfirst and then split the keyboard, or split the keyboard andthen layer tones. When you use layer and split in combination,the high range of the keyboard is assigned two tones (maintone + layered tone), and the low range two tones (split tone+ layered split tone).LAYER SPLITB r a s s _ G735A-E-078AKeyboard SettingsP i z z _ GF r . H o r n GLAYERSPLIT[+]/[–]TONETRANSPOSE/FUNCTIONWK3000_e_74-88.p65 04.3.26, 0:11 PM76
