Playing Built-in SongsE-30Use the following procedure to adjust the balance betweenthe volume of what you play on the keyboard and songplayback volume.1. Press ct and then use the bs (10-key) [4] (o)and [6] (p) keys to display “Song Vol” (pageE-6).2. Use the bs (10-key) [–] and [+] keys to adjust thesong volume.The procedure below lets you select the same keyboard toneas the one being used in the song and play along with yourfavorite tunes.1. After selecting a song, hold down br for abouttwo seconds until the displayed tone namechanges to the tone name of the song.• If your currently selected tone is the same as the songtone, the display contents will not change.2. Play along with song playback.• If you select a song that uses different tones for left andright hand play, the right hand part tone is assigned to thekeyboard.You can turn off the right hand part or the left hand part of asong during playback and practice playing along with theremaining part.1. Press bn to select the part you want to turn off.Each press of bn cycles through the settings shownbelow.2. Press bm.This starts playback in accordance with the setting youselected in step 1.• During playback with one part turned off, only the notes ofthe part that is turned off are shown on the display.You can transfer song data from your computer to the DigitalKeyboard and assign them to song numbers 153 through 162,which are called “user songs”. After that, you can select usersongs for playback and for lessons (page E-31). Forinformation about transferring song data from your computerto Digital Keyboard memory, see page E-62.• For information about how to delete song data loaded froma computer, see page E-57.Adjusting the Song VolumePlaying with the Tone as Song PlaybackS o n g V o lTurning Off the Part of One Hand for Practice(Part Select)Increasing the Selection of Songs(User Songs)Right hand part offLeft hand part offBoth hand parts offBoth hand parts on