Programming270 Service Instructions 755 A/756 A - 00.0 - 02/20195.1.10.4 Set clamp speed while transport p. 3295.1.11 Transport clamp p. 3305.1.11.1 Set return speed p. 3305.1.11.2 Set insertion speed p. 3305.1.11.3 Softstart for insertion speed p. 3305.1.11.4 Return of transport clamp p. 3315.1.11.5 Waiting position of transport clamp p. 3325.1.12 Process of transport clamp p. 3335.1.12.2 Select process of transport clamp p. 3345.1.12.3 Select piping type p. 3355.1.12.4 Spread transport clamp p. 3365.1.12.7 Set transport clamp pressure p. 3335.1.13 Program loading process p. 3375.1.13.1 Select flap clamps p. 337Vacuum On/Off p. 337Downholder On/Off p. 3375.1.13.4 Select downholder mode p. 339Waistband clamp On/Off p. 3375.1.13.6 Select pocket bag clamp mode p. 3385.1.13.7 Select blowing mode p. 341Breast welt mode On/Off p. 3385.1.13.10 Select pedal mode p. 3445.1.15 Stacker/smoother/blow-off/roll-off p. 345Stacker On/Off p. 3455.1.15.1 Select clamping time p. 345Smoother On/Off p. 345Set smoother: Start after corner cut p. 3455.1.15.3 Set duration of grip stacker signal p. 3455.1.15.4 Lift transport clamp after corner cut p. 345Blow-off On/Off p. 3455.1.15.11 Set blow-off time p. 345Roll-off On/Off p. 3455.1.15.6 Outfeed roller: Time after corner cut p. 346Menu item Option/describedon page
