Troubleshooting466 Service Instructions 755 A/756 A - 00.0 - 02/20198408 Information Waiting for RESET by machine.8409 Information Switch off and on the machine again.8410 Information Update failed! Should the program be retransmitted?8411 Information Machine checks new program. This process can take up to 30 sec.8412, 8413 Information Update failed! Should the program be retransmitted?8414 Information Update completed!8415 Information Continue with old software. (Use may result in serious problems!)8801-8806,8890, 8891Information Error in test pins, signalprocessing, event processing,memory wrapper, list functions:internal error• Switch off and on the machineagain• Perform software update p. 431• Inform Dürkopp Adler CustomerServiceError code 9000-9999: Error messages general machine-specific errors9000 Reminder to execute the refer-ence run after switching onPress the left pedal backwards9001 Corner knife station swiveled outduring sewingCheck/set fastening of corner knifestation9002 Folding station swiveled outduring sewingCheck/set fastening of foldingstation9003 Wrong needle position Manually turn the handwheel to theupper position of the thread lever(top dead center)9005 Waiting for RESET Push the RESET-Switch9006 RESET-Switch active Release the RESET switch9007 Test the loading process Resume the process after pushingthe start pedal9013 Tape missing Insert tape9014 Position of transport clampdoesn't match the installed dieCorrect position of transport clamp inthe program parameters p. 3309015 Wrong setting of flap scanning inthe seam programCorrect seam programError code Symbol Meaning Remedial action
