ProgrammingService Instructions 755 A/756 A - 00.0 - 02/2019 2715.1.15.7 Time after roll-off until lift-up p. 3465.1.15.8 Roll-off Time p. 3465.1.15.9 Roll-off Speed p. 346Zipper cutter On/Off p. 2955.2 Global parameters5.2.1 Set positioning point seam begin./center/end p. 3585.2.2 Adjust transport clamp p. 360Lower transport clamp automatically On/Off p. 3605.2.2.2 Clamp down: Time to next action p. 3605.2.2.3 Speed to corner knife position p. 3605.2.2.4 Speed to waiting position p. 3605.2.2.6 Delay till clamp moves to seam begin. p. 360Automatic transport clamp return On/Off p. 3605.2.3 Set needle thread-clamp/-catcher/-tension p. 3615.2.3.1 Time: Thread clamp open p. 3615.2.3.2 Seam end: mm till thread clamp opens p. 3615.2.3.3 mm with needle thread catcher open p. 3615.2.4 Zipper cutter p. 3585.2.4.1 Set zipper cutting time p. 3585.2.6 Adjust corner knife p. 3585.2.6.1 Duration of corner knife On p. 3585.2.7 Maximum hook thread counter p. 358Needle thread monitor On/Off p. 358Transport clamp quick adjustment p. 3585.2.11 Set machine process speed p. 3595.2.18 Set password protection p. 362Set counting direction of piece counter UP/DOWN p. 359Knitwear mode On/Off p. 3596.0 DAC internal For DA staff only7.0 DAC update p. 400Menu item Option/describedon page
