Quasar CM-3211/CM-4221 Series User and Installation Guide226.5 Context MenuAll functions on the Navigation Bar are also accessible from the context menu, which is availablewhen right-clicking on a device within the Discover List, as seen in the following figure:Figure 20: Context MenuAssign IP TabThe Assign IP tab or context menu option is used to automatically assign the IP address of theselected device(s). This function can be used for automatic batch network configuration.The Assign IP tab or context menu option is used to automatically assign the IP address of theselected device(s). This function can be used for automatic batch network configuration. The AssignIP tab or context menu option is grayed if a device has not been selected.Selecting this tab or option opens the Assign IP window, which displays a list of devices which needto be updated, as shown in the illustration below. The Assign IP window is divided into two areasSee section 6.6 for more details.6.6 Configuring Communication Settings on the Quasar Camera1. Connect the camera to the network on the same VLAN/LAN as the workstation.2. If the network supports the default, open DNA utility by running dna.exe which can befound in the DNA Utility folder in the supplied CD.Note:DNA is an alternative software to Device Search. Either of these programs may beused.3. In the DNA application, click the DNA button.4. If the Windows Firewall is enabled, a security alert window pops up.
