Quasar CM-3211/CM-4221 Series User and Installation Guidevi1 Document InformationDocument Scope and PurposeThe purpose of this document is to provide instructions and installation procedures for physicallyconnecting the Quasar camera. After completing the physical installation, additional setup andconfigurations may be required before video analysis and detection can commence.Note:This document is intended for use by technical users who have a basicunderstanding of CCTV camera/video equipment and LAN/WAN networkconnections.Warning:Installation must follow safety, standards, and electrical codes as well as the lawsthat apply where the units are being installed.Proprietary Rights and Non-DisclosureThis manual is delivered subject to the following restrictions and conditions: This document contains proprietary information belonging to DVTEL, Inc. This informationis supplied solely for the purpose of assisting explicitly the licensee of the DVTEL units. No part of this document contents may be used for any other purpose, disclosed to anythird party or reproduced by any means, electronic or mechanical, without the expressprior written permission of DVTEL, Inc.Trademarks and CopyrightsThis manual and its contents herein are owned by DVTEL, Inc. All rights reserved.DVTEL, the DVTEL logo, Quasar CM-3211/4221 are trademarks of DVTEL, Inc.Products and trademarks mentioned herein are for identification purposes only and may beregistered trademarks of their respective companies.DVTEL, Inc. makes no representations whatsoever about any other products or trademarksmentioned in the manual.2013 © DVTEL, Inc. All rights reserved
