Daewoo DV–6T834B Owner's Manual

Also see for DV-6T834B: Owner's manual Owner's manual Owner's manual

14Various methods of connecting your TVAUDIOVIDEOS-VIDEOANT INPUTS-VIDEO INPUTA/V INPUTCOMPONENT INPUTCAUTIONCAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.DO NOT REMOVE COVER (OR BACK).NO USER SERVICEABLE PARTS INSIDE.REFER SERVICING TO QUALIFIED SERVICE PRESONNEL.RISK OF ELECTRIC SHOCKDO NOT OPEN20 18 16 14 12 10 8 6 4 321 19 17 15 13 11 9 7 5 3 1DVD DVD & VCRRLOUT IN ANT.INRF OUTAUDIO OUTRLYPrPbDIGITAL AUDIO OUTCOAXIALCOMPONENT OUTS-VIDEO OUTAUDIOVIDEOMethod 1Unplug the RF cable from the “ANT.IN” Jack on the rear panel of the TV. Plug this cable into the“ANT.IN” jack on the rear panel of the DVD+VCR. Connect the “RF OUT” jack on the DVD+VCR tothe “ANT.IN” jack on the TV with another RF cable.If your cable system provides all your channels, connect an RF Cable from the OUT jack of theCable Box to the "IN From Antenna" jack on the DVD+VCR unit.Method 2 : Connecting to a TV equipped with audio/video in jacksUse the supplied audio/video cable to connect the Video Out jack on the DVD+VCR to the Video Injack on your TV. Connect the Audio Out jack on the DVD+VCR to the Audio In jack on the TV.Match the color of the cable to the color of the jack.Method 3 : Connecting to a TV equipped with component video in jacksConnect component video cables (not supplied) from the Component Video Out jacks on theDVD+VCR to the Component Video In jacks on the TV. If you do not receive a clear picture usingthe Component Video Pr, Pb, Y jacks, try connecting to the Cr, Cb, Y jacks instead. The componentvideo connection only works in DVD playback mode.To use the VCR or view TV channels, you still need to connect the RF cable or the audio/videocables.Method 4 : Connecting to a TV equipped with S-Video in jacksConnect an S-Video cable (not supplied) between the S-Video Out jack on the DVD+VCR to the S-Video In jack on the TV. The S-Video connection only works in DVD playback mode. To use theVCR or view TV channels, you still need to connect the RF cable or the audio/video cables. The default RF Output channel is CH3. If Channel 3 is used by a TV station, you must change itto Channel 4. See "To Set Output Channel" on page 25.C ONNECTING TO A TV• VHF: TV channels 2~13, UHF: TV channels 14~69, CATV: Cable TVOutside Antenna or WallAntenna OutletRear Panel of DVD+VCRRear Panel of TVMethod 1Method 2Method 3Method 4Downloaded From DvDPlayer-Manual.com Daewoo Manuals