58ChecksSymptomT ROUBLESHOOTING (VCR)• A screen in Pause mode is shakingor slow playback is not clear.• The unit will not record a TVprogram.• When [REC] is pressed, thevideotape is immediately ejected.• Timer recording from Cable TVdoes not work.• In spite of pressing [CH+/-], achannel can not be set.• Screen is distorted while playing acopy of a tape.• Remote control does not work.• [REW] and [FF] Buttons on remotecontrol do not work.• VISS index search does not work.• Cable broadcasting can not beselected.➤ Try using a head-cleaner.➤ Try using the [TRACKING+/–] buttons.➤ Check whether the desired channel is visible on the screen. Ifnot, press [TV VIEW] to view the TV.➤ Check whether the timer recording settings are right.➤ Are RF cables connected to the antenna connection correctly?➤ Does a channel number appear on the display?➤ Check the record safety tab on the videotape.➤ Is the RF cable connected to the "ANT.IN" terminal?➤ Make sure the clock is set correctly.➤ Does the display show “ ” (Ready for timer recording)?➤ Make sure the timer recording settings are right.➤ Check the record safety tab on the videotape.➤ Was the cable data output code set correctly?➤ Is the cable box setup and output channel set correctly? Referto its user manual for instructions.➤ Did you enter a password? (Please cancel it.)➤ Did you turn off your player? (Please turn it on.)➤ The selected channel cannot be stored.➤ Please check your channel settings or press a number button.➤ Some rental tapes or discs are set to prevent copying inmanufacturing. These tapes cannot be duplicated in goodcondition.➤ Battery may be weak or dead.➤ Make sure you are within 23 feet (7 meters) of the unit, andthat there are no obstacles between the remote and the frontpanel.➤ If a videotape is completely rewound, “VISS REW” and “REW”do not work.➤ If a videotape has been played completely the end, “FF”, “VISSFF”, “PLAY” and “REC” do not work.➤ Are you playing a tape that was not recorded in this recorder?➤ You may have started recording while the VCR was paused.Please start recording from Stop mode.➤ Select “CABLE” not “NETWORK” in the “CHANNEL SETTING”menu.Downloaded From DvDPlayer-Manual.com Daewoo Manuals