57HELPChecksSymptomT ROUBLESHOOTING (VCR)• “Power On” does not work.• Unit does not work even in“Power On”.• A videotape will not insert.• On inserting a videotape, the tapeis re-ejected.• A videotape is not ejected.• A channel on video and a playscreen does not appear.• Noise (screen noise) appears onscreen.• Noise appears on screen afterrecording.• While in Play mode noise appears.• Sound and picture are irregular.• Sound comes on but picture doesnot appear.• Screen is irregular and stripesappear.• "Screen Error" message is displayedon screen.• While recording and playing, thetop of screen waves.• A screen is not clear.➤ Make sure the power plug is inserted in an electric outlet.➤ Make sure a videotape is inserted.➤ Press [VCR] on the remote control or press DVD/VCR on thefront panel of the unit.➤ Unplug the unit and plug it in again.➤ Make sure a power plug is inserted in an electric outlet.➤ Make sure a videotape is not already inserted.➤ Make sure the videotape is inserted in the right direction (theside with the transparent window should be on the top)➤ Have you inserted the videotape again just after the tape wasejected? Try it again after fully ejecting it.➤ When a videotape jams on insertion the tape may not beinserted correctly. Remove the tape and then reinsert it gently.➤ This is a safety feature to protect your videotape. Please pullout the tape and insert it again.➤ If the product is not used for a long time, a videotape may notbe ejected because the tape inside may be stretched. In thiscase, unplug the unit for about 10 minutes, plug it in again,then press [EJECT].➤ Check your antenna’s connection.➤ TV channel should be set to video channel (3 or 4).➤ Check if your antenna’s signal is weak. If so, connect afrequency amplifier to the device.➤ Press [TV/VCR] until “VCR” is displayed on the display panel.➤ VCR is not playing and is tuned to a weak TV channel.➤ Select TV by pressing [TV/VCR] on remote control.➤ While playing a videotape, there may be some noise at thebeginning of the tape or when resuming playback after pausingthe tape, which is normal.➤ Press [TRACKING +/–] for better picture quality. Videotapemay be poor. Try playing another one to decide if the problemis the tape of the VCR.➤ Use a head-cleaner to clean the VCR heads. VCR heads maybe contaminated.➤ Because VCR Play signals are not stable like a TV signals, thescreen may be unstable or curved while playing. To fix theproblem, adjust the horizontal adjustment on the TV.➤ If the videotape is old or was recorded on another modelbands may appear on the screen.➤ Try using the [TRACKING+/–] buttons.➤ Try using a head-cleaner.Downloaded From DvDPlayer-Manual.com Daewoo Manuals