24To Memorize Channels Manually To add channels manually:Press [VCR], then press [SETUP] andselect “CHANNEL SET”.Select “Add/Remove Channels”.1Select the desired channel andmemorize it.Use the [0-9] buttons to select the desiredchannel.When [√] is pressed, “REMOVED” underthe channel number changes to “ADDED”.2Check the memorized channel.To check the memorized channel, press [CH+/–] on the remotecontrol.3ADD/REMOVE CHANNELSChannel 02is now ADDED.M EMORIZING TV C HANNELSPress [VCR], then press [SETUP].Press [†(CH-)] to move the to“CHANNEL SET”, and then press [ENTER].Select “Auto Channel Search”.Press [ENTER] to select “AUTO CHANNELSEARCH”.Select “Detect Automatically”.Press [ENTER] to detect the channelautomatically.The DVD+VCR searches for all availablechannels. When this process is complete,the lowest channel found is displayed.Check memorized channels.To check the memorized channels, press [CH+/–] on the remotecontrol.123To Automatically Memorize ChannelsSETUPCLOCK SETTIMER RECORDINGSCHANNEL SETFUNCTIONSLANGUAGE SELECTAUTO CHANNEL SEARCHWhat type of signal areyou using?Cable TVAntennaDetect AutomaticallyAUTO CHANNEL SEARCHNow scanning channel 11CHANNEL SETAuto Channel SearchAdd/Remove ChannelsSignal Type: CABLECable Box SetupChannel Change: CH3CHANNEL SETAuto Channel SearchAdd/Remove ChannelsSignal Type: CABLECable Box SetupChannel Change: CH3 Memorizing channels allows you to use the [CH+/-] button without seeing empty channels. Youcan manually delete channels you do not want to watch.Downloaded From DvDPlayer-Manual.com Daewoo Manuals