24Should you wish the stations to have the samenumbers as those used on the TV, follow theinstructions in "Sorting programme locations" onpage 35.Else ...exit the basic installation function and enjoy yourplayer.5 MANUAL SETPR01 BBC1 PR08 SKYSPR02 BBC2 PR09 MTVEPR03 ITV PR10 P-10PR04 CHA4 PR11 P-11PR05 SKY1 PR12 ----PR06 SKYN PR13 ----PR07 SKYM PR14 ----PR+/-:SELECTOK:CONFIRM SETUP:END• If you don´t see this picture, because you don´t use a SCART cable, search thispicture now (CH 52) with the station tuning functions of your TV set (see its usermanual).• In case of interference problems on CH 52, type in another transmission channel between 21 and 69 usingthe number buttons.CHECK UP! Auto Clock is only available for models with the PDC function (see page 36).Some broadcasting stations may send the time and date along with the PDC data. Thevideo will automatically use this time and date during the initial setting up procedureduring normal use, and every time you switch the video off at the mains. If you find thatthis time and date is incorrect you can remove this feature by following the steps belowchanging it to OFF mode, you will then have to manually set the time and date, seepage 25.Call the player’s "MAIN SETUP",choose "VCR SETUP".And press the [OK] button.1 Select “AUTO CLOCK ON/OFF”.If you want AUTO CLOCK OFF mode, select it andpress [OK] button to confirm.2Auto ClockVCR SETUPCLOCK SETRF OUTPUT SET16:9 SETOSD ON/OFFAUTO CLOCKPR+/-:SELECTOK:CONFIRM SETUP:ENDAUTO CLOCKONOFFPR+/-:SELECTOK:CONFIRM SETUP:ENDDV6T711P-AP(DESUK)1 02.7.24 11:16 AM ˘ ` 24 mac001 300DPI 120LPI