Setup61Move: Select : Exit:Setup/ReturnMove: Select : Exit:Setup/ReturnAUDIO Setup Before setting it, you should change status into DVD by pressing [DVD] button on theremote control.Select a digital output.Set output conditions to coaxial or opticalterminal. You can set following three(3) values ofdigital output;• Bitstream: The same signal as audio signalrecorded in disc goes to digital audio outputterminal.• PCM: Decoded audio signal goes to digitaloutput terminal.• Off: Not any output goes to digital audiooutput terminal.2Select Dual Mono.Dual Mono means 2 individual mono channels.Dual Mono is mainly used to apply 2different languages to one program. Thisfunction is similar to multichannel soundfunction supported in TV or VCR. 2 monochannels can be combined into total 4 values;Stereo, L- Mono, R- Mono and Mixed Mono.3A user may select audio menu according to a user’s speaker set.While DISC STOP or Resume STOP, press [SETUP/ENTER] button.1• Stereo: outputs left channel and right channel to left speaker and rightspeaker respectively.• L- Mono: outputs left channel to left speaker and right speaker.• R-Mono: outputs right channel to left speaker and right speaker.• Mixed Mono: mixes 2 mono channels and outputs the mixed channel to leftand right speaker at the same time.Language Video Audio OthersDigital Out BitstreamDual Mono StereoDynamic Range OffBitstreamPCMOffLanguage Video Audio OthersDigital Out BitstreamDual Mono StereoDynamic Range OffStereoL-MonoR-MonoMixed MonoDV6T711P-AP(DESUK)2 02.7.22 3:45 PM ˘ ` 61 mac001 300DPI 120LPI