VCR Operation33Tuning in New StationsTuning The TV and player are switched on. To see the picture from your player, press the station button on the TV reserved for player input or the AV (Audio /Video) button. "AV1/2" should not be selected with the AV button on the player.To complete the set-up of your video recorder whenthe auto set has not stored all of the channels orwhen you wish to store a new channel.Call the video’s "MAIN SETUP", choose "PRPRESET".1 Select "MANUAL SET".2 Choose any unused location number "----" or "P-xx"...It's simplest to use the same location number onboth the TV and video.... and confirm.3 Set the station you want:• the programme location number;• the broadcast system you want (Aerial(CH) orCable(CC)),• You can directly enter the real channel number withthe [0 to 9] buttons, or search by pressing [< / >],• The fine tuning you can adjust,• When the program is encoded (and you have adecoder connected to socket EURO AV2), press the[< or >] to select ON or OFF.• Change or create the station name.4Once you see the station you want, store it.Tune in further stations (from step 3 onwards) or exittuning mode.5PR PRESETAUTO SETMANUAL SETPR ERASEPR ALIGNPR+/-:SELECTOK:CONFIRM SETUP:ENDMANUAL SETPR+/-: UP/DOWN> : SELECTOK:CONFIRM SETUP:ENDMANUAL SETPR01 BBC1 PR08 SKYSPR02 BBC2 PR09 MTVEPR03 ITV PR10 P-10PR04 CHA4 PR11 P-11PR05 SKY1 PR12 ----PR06 SKYN PR13 ----PR07 SKYM PR14 ----PR+/-:SELECTOK:CONFIRM SETUP:ENDPR 04RECEPTION AERIALAUTOSEARCH CH _ _FINE TUNINGDECODER ONNAME _ _ _ _MANUAL SETPR+/-: UP/DOWN> : SELECTOK:CONFIRM SETUP:ENDPR 03RECEPTION AERIALAUTOSEARCH CH 03FINE TUNINGDECODER ONNAME _ _ _ _MANUAL SETPR+/-: UP/DOWN0/1: CHANGE/CREATEOK:CONFIRM SETUP:ENDPR 03RECEPTION AERIALAUTOSEARCH CH _ _FINE TUNINGDECODER ONNAME _ _ _ _If DECODERmode does not appearon the screen, it is notavailable on yourvideo.DV6T711P-AP(DESUK)1 02.7.24 11:16 AM ˘ ` 33 mac001 300DPI 120LPI