VCR Operation37Normal timer recording For timer recordings, clock, date, and stations must be set correctly. Load a cassette with its safety tab in place and with sufficient free space for the recording.Call the player’s "MAIN SETUP", choose "TIMERPROGRAM".Decide if you want to record "ONCE", "WEEKLY" or"DAILY"...... and confirm.1 Type in one after the other:• The programme location number;• the time the broadcast starts,• the time the broadcast ends,• the day of the broadcast, if it is not today.• Select LP if you wish to make a very longrecording .• Switch off PDC here if you need to .2 If you wish to make changes:Move to the position you want to change using the[< / >] buttons. Change the setting using the [PR+/- ]or [number] buttons.If all setting are ok, press [< or >], till you see “OK :CONFIRM” in the bottom line.Confirm.3 Switch your player off.• Wait a few seconds after typing a one-digit-number.• If you have made a mistake, move to the position you want to change using the [< / >]buttons and change the setting.• If programme timings overlap, the machine will give a warning message. If you don’t adjustthe times, the machine will record the first programme completely then continue with thesecond one.• If there is no sufficient free space for the recording on the cassette the video switchesautomatically to “LP” for double recording capacity.• The recorder will eject cassettes which have the safety tab removed.PR+/-:SELECT(AV1/AV2)0-9 :SETUP(PR)>:CORRECT SETUP:ENDPR --START TIME --:--END TIME --:--START DATE --/--TAPE SPEED SPPDC/VPS ONTIMER PROGRAM (ONCE)PR 01START TIME 18:10END TIME 20:30START DATE 22/03(FRI)TAPE SPEED LPPDC/VPS ONPR+/-:SELECT(AV1/AV2)0-9 : SETUP (PR)> :CORRECTOK:CONFIRM SETUP:ENDTIMER PROGRAM (ONCE)HOW OFTEN DO YOU WANTTO RECORD THIS PROGRAM?PR+/-:SELECTOK:CONFIRM SETUP:ENDONCEWEEKLY(ONCE A WEEK)DAILY(MON-FRI)DAILY(MON-SAT)DAILY(MON-SUN)CHECK UP!DV6T711P-AP(DESUK)1 02.7.24 11:17 AM ˘ ` 37 mac001 300DPI 120LPI