Daewoo SD-2100P Owner's Manual

Also see for SD-2100P: Owner's manual

Contents

VCR Operation39More FunctionsClock / counter display The counter counts in real time from the point you load the cassette. This does not have to be its beginning! Thecounter does not count unrecorded parts of the tape. If you rewind beyond the zero position, the counter counts in negative values (e.g. – 0:01:15).Each time you press [DISPLAY] button,1x: Time and date+current status Time and date2x: Counter+current status counter3x: disappear.But if you press [CLK/CNT] button, clock and counter ondisplay window will change each other.• If didn’t wind tape (PLAY, FF, REW,...), it doesn’t appear the tape remain time.• In case that the timer recording information is inputted in the received broadcasting signal ,press the button to display the PDC icon.STOP SP PR01 ARD14:00 14/10 E180 00:48STEREO ONVAccessing counter zero positionThe player will wind to the position 0:00:00 and stop.Remaining time and cassette lengthCall the player’s “MAIN SETUP”, choose “TAPE CONTROL”.When you want the player to show the time remaining from the current player tapeposition (to find out if there is sufficient space for a recording, for example).To ensure the remaining time shown is accurate, select the length of cassette currentlyloaded by selecting this function until you reach the correct length.• Remaining time display is only possible when the cassette is loaded.TAPE CONTROL TAPE REMAINE-240 01:27TAPE REMAINGO TO ZEROCOUNTER RESETINDEX+INDEX-E-180E-240E-300PR+/-:SELECTOK:CONFIRM SETUP:ENDPR+/-:SELECTOK:CONFIRM SETUP:ENDREW SPGO TO ZERO0:02:13CHECK UP!CHECK UP!DV6T711P-AP(DESUK)1 02.7.24 11:17 AM ˘ ` 39 mac001 300DPI 120LPI