16Setting up your player(Option 1) - Connecting your player through RF leadWith this connection, if your player is receiving CH ARD and your TV is displaying CH3, when you press the TV/VCRbutton on the remote control, your TV will automatically display the CH ARD. “VCR” will be displayed.In this mode, to change the viewing channels the PR- and PR+ buttons on the player remote need to be used. To switchoff this mode press TV/VCR on the remote control, TV remote can now be used as normal. You will get better picturesand sound quality if you connect your player with a scart lead.n Before you start, unplug all the equipment from the mains supply.TelevisionAerialThe type of aerial you should use,depends on local interferenceand how far you are from thetransmitter. You should contact alocal retailer if you have anyquestions about your aerial.Back view of your playerAC 110-240V,50/60 Hz(Option 2) - Connecting your player through a scart leadTelevisionAerialBack view of your playerAC 110-240V,50/60 HzScart lead (If supplied)DVD-Video(PAL) 02.3.15 5:44 PM ˘ ` 16