222nd scart socket2nd scart socketIf your video has the AV2 output, shown in the diagram below, you can connect other equipment as seen on pages 17-20.DIGITAL AUDIO OUTRANT.INANT.OUTEURO AV1EURO AV2/DECODERLAUDIO OUT VIDEO OUTS-VIDEO OUT2nd scartINPUT ONLYINPUT+OUTPUTWhen connecting other equipment please refer to their manuals for further information. This video manual recommendsthe set up as shown on page 17. When connected by this method if the equipment is turned off the video behaves asnormal, but if the equipment is turned on the video will automatically switch over to AV2 mode and displays thechannel of the other equipment, channel selection can only be performed by the other equipment, the video PR+/PR-buttons have no effect.To return to normal video use the other equipment must be turned off.Recording from other Equipment.Simple recording can be performed, ensure the equipment is turned on and is displaying the correct channel.Timer recording, set the video to perform a timed recording ensuring AV1 is selected as the channel to be recorded.Some equipment may have a timer which allows it to be powered on to the correct channel, if this feature is notavailable the other equipment should be left powered on.Front AVIf the video has front input sockets, it is possible to connect devices such as acamcorder to the video. To watch a camcorder tape the video must be in AVFmode. Recordings of this input are the same as described on page 20.DVD-Video(PAL) 02.3.15 5:44 PM ˘ ` 22