Setup61AUDIO Setupn Before setting it, you should change status into DVD by pressing [DVD] button on theremote control.Select a digital output.Set output conditions to coaxial or optical terminal.You can set following three(3)values of digital output;• BITSTREAM: The same signal as audio signalrecorded in disc goes to digital audio outputterminal.• PCM: Decoded audio signal goes to digitaloutput terminal.• OFF: Not any output goes to digital audio outputterminal.2Select Dual Mono.Dual Mono means 2 individual mono channels.Dual Mono is mainly used to apply 2different languages to one program. This functionis similar to multichannel soundfunction supported in TV or VCR. 2 mono channelscan be combined into total 4 values;Stereo, L- Mono, R- Mono and Mixed Mono.3A user may select audio menu according to a user’s speaker set.While DISC STOP or Resume STOP, press [SETUP/ENTER] button.1• Stereo: outputs left channel and right channel to left speaker and right speakerrespectively.• L- Mono: outputs left channel to left speaker and right speaker.• R-Mono: outputs right channel to left speaker and right speaker.• Mixed Mono: mixes 2 mono channels and outputs the mixed channel to leftand right speaker at the same time.Move Select Exit : Setup/ReturnLanguage Video Audio OthersDigital Out BitstreamDual Mono StereoDynamic Range OffBitstreamPCMOffMove Select Exit : Setup/ReturnLanguage Video Audio OthersDigital Out BitstreamDual Mono StereoDynamic Range OffStereoL-MonoR-MonoMixed MonoDVD-Video(PAL) 02.3.15 5:45 PM ˘ ` 61