Daewoo SD-8100 Owner's Manual

Contents

44Connections and CopyingTo the TV via antenna cable (if you are not using a SCART cable)n If you are using a SCART cable, select the AV input on the TV to see the picture from the player.n If you are not using a SCART cable, select the button number on the TV reserved for video input to see the picturefrom the player.If you are not using a SCART cable, your player can transmit pictures and sound to the TV via the coax aerial cable. Justtune the TV to the player's transmitting channel (factory set to UHF CH 52). Tune the TV carefully to ensure the bestpictures and sound.Once you have carried out the steps in "Connectingup the player" , switch on your TV.Press the OK button of the player’s remote controllonger than 5 seconds to call the player´s testpicture.Tune the TV to the test picture using the channel pre-set functions of your TV as described in its manual.When you have found the test picture, store it underthe button number on your TV for player input.Press the OK button of the player’s remote controlagain longer than 5 seconds to release the testpicture.1• If the quality of the test picture transmitted to the TV ispoor due to interference caused by a stationtransmitting on channel 52, you can tune the player toa different transmitting channel. Find a free channelbetween 21 and 69 on your TV.Call the player’s "MAIN SETUP" choose"VCR SETUP" then "RF OUTPUT SET".Type in the free channel.Store and exit.2• If the quality of the test picture transmitted to the TV is poor, fine-tuning on the TV may help(refer to the TV manual).• Without a scart cable, you will not get stereo sound from a TV capable of stereo sound.C H E C K U P !RF OUTPUT SET0-9:SELECT (21-69)OK:CONFIRM SETUP:ENDCH 52DVD-Video(PAL) 02.3.15 5:44 PM ˘ ` 44