Figure 4-28Please refer to the following sheet for detailed information.Parameter FunctionMax connection It is the max Web connection for the same device. The valueranges from 1 to 120. The default setup is 120.TCP port The default value is 37777. You can input the actual portnumber if necessary.UDP port The default value is 37778. You can input the actual portnumber if necessary.HTTP port The default value is 80. You can input the actual port number ifnecessary.HTTPS port The default value is 443. You can input the actual port number ifnecessary.RTSP port The default value is 554.4.8.2.3 PPPoEFrom main window->Setup->Network->PPPoE, the PPPoE interface is shown as in Figure 4-29.Input the PPPoE user name and password you get from the IPS (internet service provider) and enablePPPoE function. Please save current setup and then reboot the device to get the setup activated.Device connects to the internet via PPPoE after reboot. You can get the IP address in the WAN from theIP address column.Please note, you need to use previous IP address in the LAN to login the device. Please go to theIP address item to via the device current device information. You can access the client-end viathis new address.156
