2 Front Panel and Rear Panel2.1 Front Panel2.1.1 NVR6000/ NVR616-128-4K SeriesFor the product of LCD, the front panel of NVR6000/NVR6064/NVR616-128-4K is shown as below. SeeFigure 2-1.Figure 2-1Please refer to the following sheet for front panel button information.SN Name Function1 Power button Press it once to turn on the device.Press it for a long time to turn off the device. (Usually we do notrecommend).Press power button for a long time or pull out the power cable mayresult in device auto restart.2 System HDDIndicator lightThe blue light becomes on after system booted up properly.In the system HDD, there are device important configuration file,factory default configuration file, and device initial boot up data.3 Alarm indicatorlightThe alarm indicator light becomes on once an alarm occurred. Itbecomes on via the software detection. The alarm includes localalarm, no disk and etc.4 Networkindicator lightThe blue network indicator light is on after you connected the deviceto the network.5 USB port /6 Front panel lock /For general NVR6000/NVR6064/NVR616-128--4K series, the front panel is shown as in Figure 2-2.12
