Channel: Select the channel you want. Type: Please select from the dropdown list. There are three options: regular/motion detect/alarm.You can set the various encode parameters for different record types. Compression: System supports H.264, MPEG4, MJPEG and etc. Resolution: The mainstream resolution type is IPC’s encoding config. Generally there isD1/720P/1080P. Frame rate: It ranges from 1f/s to 25f/s in NTSC mode and 1f/s to 30f/s in PAL mode. Bit rate type: System supports two types: CBR and VBR. In VBR mode, you can set video quality. Video/audio: You can enable or disable the video/audio. Please note, once you enable audiofunction for one channel, system may enable audio function of the rest channels by default. Copy：After you complete the setup, you can click Copy button to copy current setup to otherchannel(s). You can see an interface is shown as in Figure 3-48. You can see current channelnumber is grey. Please check the number to select the channel or you can check the box ALL.Please click the OK button in Figure 3-48 and Figure 3-42 respectively to complete the setup. Pleasenote, once you check the All box, you set same encode setup for all channels. Audio/video enablebox, overlay button and the copy button is shield.Please highlight icon to select the corresponding function.Figure 3-413.7.1.2 OverlayClick overlay button, you can see an interface is shown in Figure 3-42. Cover area: Here is for you to cover area section. You can drag you mouse to set proper section size.In one channel video, system max supports 4 zones in one channel. You can set with Fn button ordirection buttons.57
