Figure 3-59b) Check the box here to select manual record channel(s). You can see the correspondingindicator light on the front panel is on. Channel: It is to display device all channels. Manual: It has the highest priority. Enable corresponding channel to record no matter what periodapplied in the record setup. Now system is record general file. Auto: System enables auto record function as you set in chapter 3.7.2 schedule interface(General/Motion detect/Alarm) Stop: Stop current channel record/Snapshot no matter what period applied in the record setup. All: Check the All box to select all channels.c) Click OK button to complete manual record setup.3.7.5.2 Manual SnapshotClick button at the preview control bar, you can snapshot 1-5 picture(s). From mainmenu->Setting->Camera->Encode->Snapshot, you can set snapshot times. You can go to chapter 3.8 toview snapshot picture.3.7.6 Holiday Record/SnapshotIt is for you to set holiday record or snapshot plan. Please note the holiday record/snapshot setup has thehigher priority than the ordinary date record/snapshot setup.3.7.6.1 Holiday Recorda) From Mani menu->Setting->System->General, you can go to the following interface. See Figure3-60.68
