BRAKE MASTER CYLINDERCOMPONENTSINSPECTION OF BRAKE MASTER CYLINDER FOR FLUIDLEAKAGE1. Ensure that no brake fluid leakage exists from the grom-met sections on the brake master cylinder.If leakage exists, replace the grommet with a new one.(Refer to the BR section.)2. Disconnect the connecter of the brake fluid level switch.3. Drain the brake fluid from the master cylinder.(Refer to the “brake fluid change” section.)4. Place a suitable piece of cloth under the master cylinderto prevent the brake fluid from being splashed on thepainted surface.5. Disconnect the brake pipes from the master cylinder.CAUTION:∑ If the brake fluid is spilled inadvertently over the paint-finish surface of the vehicle or resin made parts, imme-diately wipe off the brake fluid and wash with freshwater.6. Remove the master cylinder by removing the attachingnuts.MA–35qwterry12.7 ± 2.5(1.3 ± 0.3)7.9 - 11.7(0.8 - 1.2)BBHJMA00100-00079JMA00101-00080q Brake master cylinder reservoir tankw Reservoir filler cape Reservoir diagramr Grommett Brake master cylinder assemblyy Tandem master cylinder repair kit: Tightening torqueUnit : N·m (kgf-m)H : Non-reusable parts
