Operation Manual SiBE07-618_C50 Operation Manual2.5 HOME LEAVE Operation14HOME LEAVE Operation1. Press “HOME LEAVE button”.•• The HOME LEAVE lamp lights up.2. Press “HOME LEAVE button” again.• The HOME LEAVE lamp goes off.•Before using HOME LEAVE operation. To set the temperature and air flow rate for HOME LEAVE operation1.2.3. Adjust the air flow rate with “FAN” setting button as you like.1, 2Initial setting Selectable rangetemperature Air flow rate temperature Air flow rateCooling 25°C “ ” 18-32°C 5 step, “ ” and “ ”Heating 25°C “ ” 10-30°C 5 step, “ ” and “ ”HOME LEAVE operation is a function which allows you to recordyour preferred temperature and air flow rate settings.To start HOME LEAVEoperation“ ” is displayed on the LCD.To cancel HOME LEAVEoperation“ ” disappears from the LCD.When using HOME LEAVE operation for the first time, please set the temperature and air flow ratefor HOME LEAVE operation. Record your preferred temperature and air flow rate.Press “HOME LEAVE button”. Make sure “ ” is displayed in the remote controldisplay.Adjust the set temperature with “ ” or “ ” as you like.Home leave operation will run with these settings the next time you use the unit. To changethe recorded information, repeat steps 1 – 3.
