Troubleshooting SiBE811001EB151 CONVENI-PACK8.2.3 Remote Controller Service ModeOperating the CHECK/TEST button on the remote controller will make it possible to obtain"service data" and change "service setting" while in service mode.How to Enter the Service ModeService Mode Operation Method1. Select the mode No.Select the desired item from the Service menu, and then press Menu/Enter button.2. Select the Item 2.Select the desired Unit No. using the S/T (Up/Down) buttons. The corresponding data will bedisplayed.For details, refer to the table below.Basic screen Field setting mode Service modePress and hold Cancel button for 4 seconds or more. Press and hold Cancel button for 4 seconds or moreService Menu Item 2 Remarks1. Model Name Display 1. Unit No. Select the Unit No. you want to check.2. Indoor unit3. Outdoor unit2. Operating HoursDisplay 1. Unit No. Select the Unit No. you want to check.2. Indoor unit operatingtime All of these are displayed in hours.3. Indoor unit fanoperation4. Indoor unit energizedtime5. Outdoor operatingtime6. Outdoor unit fan 1operation7. Outdoor unit fan 2operation8. Outdoor comp. 1operation9. Outdoor comp. 2operation
