Danfoss FC 300 Programming Manual

Also see for FC 300: Operating instructions Instruction manual Design guide Design guide Design guide

Danfoss FC 300 Programming Manual Manual pdf 21 page image

2.1.14. Infinitely Variable Change of Numeric Data ValueIf the chosen parameter represents a numeric data value, select a digitby means of the [◀] [▶] navigation keys.130BP073.10Change the selected digit infinitely variably by means of the [▲] [▼] nav-igation keys.The chosen digit is indicated by the cursor. Place the cursor on the digityou want to save and press [OK].130BP072.102.1.15. Changing a Data Value,Step-by-StepCertain parameters can be changed step by step or infinitely varying. This applies toMotor Power (par. 1-20),Motor Voltage (par. 1-22) andMotorFrequency (par. 1-23).The parameters are changed both as a group of numeric data values and as numeric data values infinitely varying.2.1.16. Read-out and Programming of Indexed ParametersParameters are indexed when placed in a rolling stack.Par. 15-30 to 15-32 contain a fault log which can be read out. Choose a parameter, press [OK], and use the [▲] [▼] navigation keys to scroll through thevalue log.Use par. 3-10 as another example:Choose the parameter, press [OK], and use the [▲] [▼] navigation keys to scroll through the indexed values. To change the parameter value, select theindexed value and press [OK]. Change the value by using the [▲] [▼] keys. Press [OK] to accept the new setting. Press [CANCEL] to abort. Press [Back]to leave the parameter.FC 300 Programming Guide 2. How to ProgrammeMG.33.M3.02 - VLT ® is a registered Danfoss trademark 212