Danfoss FC 300 Programming Manual

Also see for FC 300: Operating instructions Instruction manual Design guide Design guide Design guide

Danfoss FC 300 Programming Manual Manual pdf 22 page image

2.1.17. How to Programme on the Numerical Local Control PanelThe following instructions are valid for the Numerical LCP (LCP 101).The control panel is divided into four functional groups:1. Numerical display.2. Menu keys and indicator lights - changing parameters andswitching between display functions.3. Navigation keys and indicator lights (LEDs).4. Operation keys and indicator lights (LEDs).Display line:Status line: Status messages displaying icons and numeric value.Indicator lights (LEDs):• Green LED/On: Indicates if control section is on.• Yellow LED/Wrn.: Indicates a warning.• Flashing red LED/Alarm: Indicates an alarm.LCP keys[Menu] Select one of the following modes:• Status• Quick Setup• Main MenuStatus Mode: Displays the status of the frequency converter or the mo-tor.If an alarm occurs the NLCP automatically switches to status mode.A number of alarms can be displayed.NB!Parameter copy is not possible with LCP 101 NumericalLocal Control Panel.130BP077.10130BP078.102. How to Programme FC 300 Programming Guide22 MG.33.M3.02 - VLT ® is a registered Danfoss trademark2